Mineralogy Characteristics and Heavy Metal Distribution of MSWI Fly Ash
【Abstract】Fly ash from municipal solid waste incineration (MSWI) plants can be categorized as a highly toxic mineral material due to the potential for leaching heavy metals. The mineralogical properties of MSWI fly ash visually reflect the heavy metals distribution in the ash, and are closely related to the release and migration behaviors of heavy metals in fly ash disposal or utilization scenarios. In order to understand the distribution of heavy metals in MSWI fly ash and provide support for heavy metals control technology, comprehensive tests on the macroscopic and microscopic mineralogical characteristics of the fly ash were conducted using X-ray diffractometer (XRD), scanning electron microscope (SEM), a mineral liberation analysis system, and other methods. The results showed that MSWI fly ash was a heterogeneous material of closely combined mineral and non-mineral phases. The main mineral phases identified by XRD included chlorides and calcium-bearing minerals, mainly calcite and portlandite. The element distribution analysis, conducted with a mineral liberation analyzer, revealed that heavy metals of MSWI fly ash were mainly present in three forms: uniform distribution in the non-mineral amorphous phase, isomorphism in calcite and other minerals, and adsorption on the surfaces of quartz and hematite. Most contents of Cu and Cr were distributed in the non-mineral phase due to their low volatility, while most of semi-volatile heavy metals (43.92% of Zn and 60.61% of Cd) were present in mineral phases. In particular, Cd, Cr and Zn were mainly present in calcite, hematite and silicates respectively.
【Keywords】 MSWI fly ash; minerals; heavy metals; mineral liberation analysis; distribution;
 Zhao Y C, Song L J, Li G J. Chemical stabilization of MSW incinerator fly ashes [J]. Journal of Hazardous Materials, 2002, 95 (1–2): 47–63.
 He P J, Zhang H, Zhang C G, et al. Characteristics of air pollution control residues of MSW incineration plant in Shanghai [J]. Journal of Hazardous Materials, 2004, 116 (3): 229–237.
 Pan Y, Wu Z M, Zhou J Z, et al. Chemical characteristics and risk assessment of typical municipal solid waste incineration (MSWI) fly ash in China [J]. Journal of Hazardous Materials, 2013, 261: 269–276.
 Ni P, Li H L, Zhao Y C, et al. Relation between leaching characteristics of heavy metals and physical properties of fly ashes from typical municipal solid waste incinerators [J]. Environmental Technology, 2017, 38 (17): 2105–2118.
 Bogush A, Stegemann J A, Wood I, et al. Element composition and mineralogical characterisation of air pollution control residue from UK energy-from-waste facilities [J]. Waste Management, 2015, 36: 119–129.
 Quina M J, Santos R C, Bordado J C, et al. Characterization of air pollution control residues produced in a municipal solid waste incinerator in Portugal [J]. Journal of Hazardous Materials, 2008, 152 (2): 853–869.
 Aubert J E, Mahieux P Y, Husson B. Mineralogical transformations during a stabilization process developed for the valorization of municipal solid waste incineration (MSWI) fly ash [J]. Waste and Biomass Valorization, 2010, 1 (2): 261–270.
 Brännvall E, Andreas L, Sj9blom R, et al. Factors influencing chemical and mineralogical changes in RDF fly ashes during aging [J]. Journal of Environmental Engineering, 2014, 140 (3): doi: 10.1061/(ASCE) EE.1943-7870. 0000802.
 Evans J, Williams P T. Heavy metal adsorption onto flyash in waste incineration flue gases [J]. Process Safety and Environmental Protection, 2000, 78 (1): 40–46.
 Wang J, Jiang J G, Sui J C, et al. Fundamental properties of fly ash from municipal solid waste incineration [J]. Environmental Science, 2006, 27 (11): 2283–2287 (in Chinese).
 Zhang Y, Jiang J G, Chen M Z. MINTEQ modeling for evaluating the leaching behavior of heavy metals in MSWI fly ash [J]. Journal of Environmental Sciences, 2008, 20 (11): 1398–1402.
 Zhang Y, Cetin B, Likos W J, et al. Impacts of p H on leaching potential of elements from MSW incineration fly ash [J]. Fuel, 2016, 184: 815–825.
 Rizmanoski V. The effect of microwave pretreatment on impact breakage of copper ore [J]. Minerals Engineering, 2011, 24 (14): 1609–1618.
 Celep O, Serbest V. Characterization of an iron oxy/hydroxide (gossan type) bearing refractory gold and silver ore by diagnostic leaching [J]. Transactions of Nonferrous Metals Society of China, 2015, 25 (4): 1286–1297.
 Lv J F, Zhang H P, Tong X, et al. Innovative methodology for recovering titanium and chromium from a raw ilmenite concentrate by magnetic separation after modifying magnetic properties [J]. Journal of Hazardous Materials, 2017, 325: 251–260.
 Reichert M, Gerold C, Fredriksson A, et al. Research of iron ore grinding in a vertical-roller-mill [J]. Minerals Engineering, 2015, 73: 109–115.
 Mc Gladrey A J, Olivo G R, Silva A M, et al. The integration of physical rock properties, mineralogy and geochemistry for the exploration of large zinc silicate deposits: a case study of the Vazante zinc deposits, Minas Gerais, Brazil [J]. Journal of Applied Geophysics, 2017, 136: 400–416.
 Parker T, Shi F N, Evans C, et al. The effects of electrical comminution on the mineral liberation and surface chemistry of a porphyry copper ore [J]. Minerals Engineering, 2015, 82: 101–106.
 Tsikouras B, Pe-Piper G, Piper D J W, et al. Varietal heavy mineral analysis of sediment provenance, Lower Cretaceous Scotian Basin, eastern Canada [J]. Sedimentary Geology, 2011, 237 (3–4): 150–165.
 Redwan M, Rammlmair D, Meima J A. Application of mineral liberation analysis in studying micro-sedimentological structures within sulfide mine tailings and their effect on hardpan formation [J]. Science of the Total Environment, 2012, 414: 480–493.
 de Andrade Lima L R P, Bernardez L A. Characterization of the soil contamination around the former primary lead smelter at Santo Amaro, Bahia, Brazil [EB/OL]. https: //doi.org/10.1007/s12665-017-6791-6, 2017-7-10.
 Redwan M, Rammlmair D, Nikonow W. Application of quantitative mineralogy on the neutralization-acid potential calculations within μm-scale stratified mine tailings [EB/OL]. https: //doi.org/10.1007/s12665-016-6344-4, 2016-12-31.
 Zhang P Y, Guo Q, Wei G Y, et al. Leaching metals from saprolitic laterite ore using a ferric chloride solution [J]. Journal of Cleaner Production, 2016, 112: 3531–3539.
 Gu Y. Automated scanning electron microscope based mineral liberation analysis an introduction to JKMRC/FEI mineral liberation Analyser [J]. Journal of Minerals & Materials Characterization & Engineering, 2003, 2 (1): 33–41.
 Leißner T, Hoang D H, Rudolph M, et al. A mineral liberation study of grain boundary fracture based on measurements of the surface exposure after milling [J]. International Journal of Mineral Processing, 2016, 156: 3–13.
 Fandrich R, Gu Y, Burrows D, et al. Modern SEM-based mineral liberation analysis [J]. International Journal of Mineral Processing, 2007, 84 (1–4): 310–320.
 Zhu F F, Masaki T, Kazuyuki O, et al. Pretreatment technology for fly ash from mswi and the corresponding study of chloride behavior [J]. Environmental Science, 2013, 34 (6): 2473–2478 (in Chinese).
 Wang C F, Chen G F, Zhu Y C, et al. Leaching toxicity and bioaccessibility of heavy metals in MSWI fly ash with various particle sizes [J]. Environmental Science, 2016, 37 (12): 4891–4898 (in Chinese).
 Zhang H, Yu S Y, Shao L M, et al. Influence of air pollution control (APC) systems and furnace type on the characteristics of apc residues from municipal solid waste incinerators [J]. Environmental Science, 2018, 39 (1): 467–476 (in Chinese).
 van Alphen C. Automated mineralogical analysis of coal and ash products-challenges and requirements [J]. Minerals Engineering, 2007, 20 (5): 496–505.
 Lima A T, Ottosen L M, Pedersen A J, et al. Characterization of fly ash from bio and municipal waste [J]. Biomass and Bioenergy, 2008, 32 (3): 277–282.
 Zhang H L, Li X P, Chen Y H, et al. Heavy metals distribution, migration characteristic and control technique during municipal solid waste incineration process [J]. Journal of Anhui Agricultural Sciences, 2013, 41 (4): 1699–1703, 1715 (in Chinese).
 Lenders J J M, Dey A, Bomans P H H, et al. High-magnesian calcite mesocrystals: a coordination chemistry approach [J]. Journal of The American Chemical Society, 2012, 134 (2): 1367–1373.
 Finch A A, Allison N. Coordination of Sr and Mg in calcite and aragonite [J]. Mineralogical Magazine, 2007, 71 (5): 539–552.
 Heberling F, Trainor T P, Lützenkirchen J, et al. Structure and reactivity of the calcite-water interface [J]. Journal of Colloid and Interface Science, 2011, 354 (2): 843–857.
 Ahmed I A M, Crout N M J, Young S D. Kinetics of Cd sorption, desorption and fixation by calcite: a long-term radiotracer study [J]. Geochimica et Cosmochimica Acta, 2008, 72 (6): 1498–1512.
 García-Sánchez A, álvarez-Ayuso E. Sorption of Zn, Cd and Cr on calcite. application to purification [J]. Minerals Engineering, 2002, 15 (7): 539–547.
 Li S R. 结晶学与矿物学 [M]. Beijing: Geological Publishing House, 2008 (in Chinese).
 Shi S L, Wu L M, Liao L B. Adsorption and fixation of chromium (Ⅵ) ion from simulated wastewater on hematite [J]. Chemical Industry and Engineering Progress, 2013, 32 (8): 1949–1954, 1959 (in Chinese).
 Wang Q, Qu Y F, Xiao G Q, et al. Characteristic of isothermal adsorption of Cr (Ⅲ) on hematite surface [J]. Acta Pedologica Sinica, 2010, 47 (1): 159–162 (in Chinese).
 Tang L, Li Q H, Chen C, et al. Distribution and pollution characteristics of heavy metals in sediments of Puding Reservoir, Guizhou Province [J]. China Environmental Science, 2017, 37 (12): 4710–4721 (in Chinese).
 Y. Investigation of sorption/desorption equilibria of heavy metal ions on/from quartz using rhamnolipid biosurfactant [J]. Journal of Environmental Management, 2009, 91 (3): 724–731.
 Schaller M S, Koretsky C M, Lund T J, et al. Surface complexation modeling of Cd (Ⅱ) adsorption on mixtures of hydrous ferric oxide, quartz and kaolinite [J]. Journal of Colloid and Interface Science, 2009, 339 (2): 302–309.
 Nelson J, Wasylenki L, Bargar J R, et al. Effects of surface structural disorder and surface coverage on isotopic fractionation during Zn (Ⅱ) adsorption onto quartz and amorphous silica surfaces [J]. Geochimica et Cosmochimica Acta, 2017, 215: 354–376.
 Chirenje T, Ma L Q, Lu L P. Retention of Cd, Cu, Pb and Zn by wood ash, lime and fume dust [J]. Water, Air, &Soil Pollution, 2006, 171 (1–4): 301–314.
 Ma W. 固水界面化学与吸附技术 [M]. Beijing: Metallurgical Industry Press, 2011 (in Chinese).